Belt Scraper Systems are essential conveyor components designed to clean residual material from conveyor belts, ensuring smooth operation and minimizing material carryback. Installed at the discharge point of the conveyor, these systems use durable scraper blades - often made from polyurethane, carbide, or stainless steel - pressed against the moving belt to remove sticky or stuck particles. Widely used in mining, cement, coal, and bulk material handling industries, belt scrapers help maintain conveyor efficiency, reduce maintenance, and prevent material buildup and spillage.
Our scrapper blades are used for minimizing wastage of valuable wash products from conveyors. Precise edge geometry for optimal scraping efficiency and flexible design for contouring and curved surfaces.
Primary belt cleaners that are designed to scrape material off the conveyor belt. They are mounted to the head pulley, below the material flow. They are ideal for removing large pieces of material, typically about 60-70 percent of initial carry back. Our belt cleaners are available in a variety of widths and blade types that can tackle even the toughest materials.
Secondary cleaners are belt cleaners that are built to scrape materials left on the belt beyond the head pulley. Secondary cleaners are located just past where the belt leaves the head pulley, and anywhere else down the beltline. Secondary cleaners are especially good at removing fines and can increase cleaning efficiency to more than 90%. Our secondary cleaners handle a variety of applications, with polyurethane, and brush options available.
The Chevron Belt Cleaner effectively cleans cleated, raised-rib, and chevron belts without the clogging and rapid wear associated with conventional brush-type cleaners. Finger length, spacing, and rotary action allows the carry back to fall free instead of clogging. Drum life ranges from 1 to 3 years depending upon the application, conditions, and the material being conveyed.
